Cobra Tuning wind deflectors for Nissan II (Z11) (2002 - 2008) - Tires and wheels for cars Rehvidemaailm.ee

Description
Installation instructions

CT Rain and wind deflectors (CT window visors) for Nissan Cube II (Z11) (2002 - 2008).

CT Deflectors (CT Window Visors) let you keep fresh air circulating in adverse weather conditions, reducing fogging and increasing passenger comfort. Featuring an attractive slimline profile, CT Deflectors(Window Visors) are individually engineered for every model – resulting in an exacting level of fit and finish. Available only in “Tape-On” version, CT Deflectors (Window Visors) are made from high quality acrylic glass.

Product Information

The benefits of CT deflectors (CT Window Visors) are for Nissan Cube II (Z11) (2002 - 2008) are:

Optimal air circulation
Reduced wind noise
Reduced fogging
Increased passenger comfort
Do not hinder side mirror visibility
Do not spoil and do not damage the window lifters
UV protection
Protection against rain, wind and snow
Self-installation possible
High quality acrylic glass
Original 3M double side tape
100% suitable
Available in Color
Available with Chrome Molding

CT Deflectors (Window Visors) let you keep fresh air circulating in adverse weather conditions, reducing fogging and increasing passenger comfort. Featuring an attractive slimline profile, CT Deflectors(Window Visors)are individually engineered for every model – resulting in an exacting level of fit and finish. Made from high quality acrylic glass produced by the world leading manufacturers, CT Deflectors (Window Visors) are available:

onlyin full sets;
only in “Tape-On” version(no drilling is required when installing);
and in a wide range of finishes.

“Tape-On” Window Visors are to install onto the window (or door frame) using industrial premium 3M Automotive Fixing Tape. “Tape-On” Window Visors are a permanent protection solution.

For most of car models many different options are available.

It is possible to choose:

Different width. For many car models we are able to offer both “Standard” or “Wide” series. The width of a “Standard series” is about 7.5-8 centimeters. The Width of a “Wide Series” is about 9-9,5 centimeters.
Different color. The standard and most popular color is Black (Smoke). Optional colors available to be chosen are Red, Green, Blue, White, Clear and Silver. Black (smoke), red, green, blue, clear are translucent. White and Silver are opaque. CT Deflectors of only Silver Color are industrially painted. CT Deflectors sets of an optional color we mark as a “Color Series”. CT Deflectors of Color Series are compatible to be chosen with both “”Standard” or “Wide” Series. CT Deflectors (Window Visors) of “Color series” - a great opportunity to make your car more unique.
Chrome-molding. Any CT deflectors set can be optionally equipped with chrome moldings –no matter what the width and the color you choose.
Third part. For some car models we offer to order a Third part set. The Set consists of two pieces to be installed on the tailgate windows in order to create a stylish and a finished line. The third part set, as the main set is available for ordering in different width and in different Color. All the options mentioned above are applicable to the “Third part” set.

CT Deflectors ( CT Window Visors ) in their variety of finishes available to be chosen do provide a car appearance that will set your vehicle apart from the crowd.

All required hardware, fixings and instructions are included with this product.

CT deflectors (Window Visors) are very easy to install. Self-installation possible, but professional installation recommended. No drilling is required when installing, as CT "Tape-On" Deflectors Window Visors are to install onto the window (or door frame) using industrial premium 3M Automotive Fixing Tape. "Tape-On" Window Visors are a permanent protection and styling solution, but if there is a need the deflectors to be uninstalled, adhesive tape can be removed by professionals without damaging the painted surface

Preparation. Open the package box with the CT deflectors set, but do it without damaging the packaging film (return is possible only if the transparent packaging film is not damaged). Check carefully, that the deflectors (visors) have no damages, and read the installation guide.

Step 1. Try to fit the deflectors on the door frames to define the right placeof best fitting. Please do it also without damaging the packaging film. Depending on car make and model, deflectors may be engineered to install on the door frame either closer to the outer edge of the door frame, or on the inner part closer to the window glass.

Step 2. Clean the door frame’s surfaces (places the Window Visors to be installed on) from dirt and dust so as it is clean and dry. Doing this please do not use car polish, abrasive, aggressive or thinning agents (solvents).
Degrease the door frame’s surfaces using the suitable for this solvent. We recommend to use for this some alcoholic degreaser.
5 To improve adhesiveness we recommend optionally to wipe the door frame with 3M adhesion promoter wipes. 3M adhesion promoter wipes are not included, but can be optionally bought from our E-Shop. In the case of using 3M adhesion promoter wipes do not install the deflectors promptly after wiping with adhesion promoter - let the adhesion promoter to dry out.

Step 3. Remove up to 2-3 cm of the protective film off from the adhesive tape on both ends of the front deflector.

Step 4. Attach front and rear ends of the front deflector on the door frame (if you don’t fit it well you are still able to remove it and attach again at this stage).
Go through steps 3 and 4 for the rear deflector. Make sure that the front and rear Deflectors fit well and on the same level creating one line.

Step 5. Pull out the protective film and apply pressure on the deflector to fix it. Make sure you apply enough pressure along the whole length of the deflector, press harder at the ends. Pressing force at this stage will ensure adhesive efficiency.
Install the other deflectors as per steps 3 to 5.

Important notices and advices:

For the best result we do strongly recommend to perform the installation in a warm room (above 0°C at least), avoiding the adverse weather conditions;
It may be usefull to warm up the surface using a blow dryer;
Do not use car polish, abrasive agents, or thinning agents;
Adhesive efficiency will improve over time - the result will be achieved within 72 hours;
If there is a need the deflectors to be uninstalled, adhesive tape can be removed by professionals without damaging the painted surface

Cart

Window deflectors Cobra Tuning for Nissan Cube II (Z11) (2002 - 2008)

Available Options